Drag image to spin

motoscope pro BMW R9T

Incl. 19% Tax , Excl. shipping
Article No.: 1005031


The motoscope pro BMW R9Te only plug&ride instrument on the market.

The CAN-Bus interface of the motoscope pro enables the complete display of all original functions (except settings for heated grips). The original plug connector for the original wiring loom makes the instrument a real plug&ride solution and a very easy installation.

A LED matrix display enables an ultra thin housing design. 734 LEDs, controlled by a 16-bit RISC processor - create an almost rimless, self-illuminating display. It provides optimal readability even under conditions of direct sunlight. Automatic brightness control is a matter of course.

The rev-counter is displayed fully scalable via the analogue LED band with drag indicator function. Main and secondary display are user configurable. Another display section shows the gear currently engaged.

Four indicator lights are pre-installed and can be used for far more input signals.

The billet aluminium casing is cnc-machined and is easily mounted by two backside threaded holes. The instrument is equipped with an ABE approval.

> Compatible with BMW R nineT Model 2014, 2015, 2016

> NOT compatible with BMW R nineT Model 2017 and later, R nineT Urban G/S, R nineT Pure, R nineT Racer, R nineT Scrambler

Parts delivered

motoscope pro with ca. 70 cm connector cable, 2 stainless steel screws, detailed installation and operating instructions.

Please find a matching bracket for the BMW R9T at the tab 'Brackets' above.

Parts delivered

  • motoscope pro with ca. 70 cm connector cable
  • 2 stainless steel screws
  • Detailed installation and operating instructions

Please find a matching bracket for the BMW R9T at the tab 'Brackets' above.

Please note: Touch sensor not included anymore, Heated-Grip-Control may not work.

Specifications and features

Length, Height, Depth 109 mm/ 47 mm/ 11 mm
Weight approx. 100 g
Mounting 2 x M3 threaded hole
Power consumption during operation max. 200 mA (load dependent)
Power consumption in standby 0.4 mA
Operating voltage 9 V - 15 V
Operating temperature -20°... +80°C
Rev counter (LED bargraph)
0 – 6, 8, 10, 12, 14, 16, 18 krpm (adjustable)
0 – 350 km/h or mph
Trip meter A
bis 999.9 km or mi
Trip meter B
bis 999.9 km or mi
Total mileage (adjustable) bis 250000 km or mi
Operating hours/Service 0 – 9999.5 h
Clock 23:59 h/min
Timekeeping 0 – 99:59:59 h/min/s
RPM count (numerical) 0 – 20000 rpm
Adjustable RPM warning (gear shift light) 0 – 20000 rpm
On-board voltage 9  – 18 V
Low voltage warning Warning if below ca. 11V
Timekeeping 0 - 100 km/h or 0 - 60 mph 0.00 – 30.59 sec.
Actual accelleration +/- 0.00 – 1.50 G
Average speed 0 – 350 km/h or mph
Max. speed 0 – 350 km/h or mph
Max. RPM 0 – 20000 rpm
Max. positive acceleration +1.50 G
Max. negative acceleration - 1.50 G
Gear display N, gear 1 - 6
Green control LED
Neutral (N)
Green control LED
Turn indicator left/right
blue control LED
High beam
Red control LED
Miscellanious warning funktions like Check Engine, ABS, low fuel
Fuel/Reserve low fuel warning